MODX Tape Loop simulation - patch walkthru

video upload by Russ Hoffman

"In this video (shot poorly with a handheld iPhone be warned!), I walk through how to create a patch on the Yamaha MODX synth that emulates a four-track variable speed tape loop player, using your own audio loop files. The John Melas 'Montage Waveform Editor' is used to make this a bit easier."

Atoms To Molecules Live Exceprts

Russ Hoffman

"Atoms To Molecules plays live at VIA festival October 2016. Excerpts of full set."

Russ Hoffman of evaton technologies

Evaton Technologies Debuts New Eurorack Modules At Knobcon

Published on Sep 18, 2018 Synthtopia

http://www.evatontechnologies.com/

"At Knobcon 2018, we talked with Russ Hoffman of Evaton Technologies about his latest module designs.

In this video, he demos his µCVC module, which lets you connect a Haken Continuum to your modular synth; his Link module, for connecting multiple modular synth systems; the RF Nomad voltage-controlled short wave radio receiver; a DIY transmitter module; and a sonar module."

The µCVC was first shown at IRCAM with the new Haken ContinuuMini. The above is the first video demo of the µCVC.

New Haken ContinuuMini & Evaton µCVC Unveiled at IRCAM - Coming to SUPERBOOTH18

"Evaton Technologies shows uCVC at unveiling of Haken ContinuuMini at IRCAM

Evaton Technologies’ Russ Hoffman [left] was on hand at ContinuuCon Paris this weekend, at IRCAM, to demonstrate the µCVC Eurorack module in conjunction with the release of the new, more affordable, more portable version of Haken Audio Continuum, called the 'ContinuuMini'.

CLICK FOR MORE »

New Evaton Technologies Link - Eurorack HDMI CV Module & Sneak Peak of Upcoming "Sonar" Module

Evaton Link Module 2-up Jam w/Morgantics Published on Apr 19, 2018 Russ Hoffman

"Morgantics stopped by to jam out on a pair of synths connected together with the new Link module coming soon from Evaton Technologies."

via Evaton Technologies:

"Link is a 4HP Eurorack synth module that enables connecting up to 18 CV/audio signals between two Eurorack cases over a single standard HDMI cable. Link is a 100% passive module, and allows signals to travel in either direction.

10 mono jacks and 14 stereo jacks combine into a single HDMI connection to another Link module in either a second Eurorack case, or simply to another place in the same case, for convenience.

The top 4 jacks are stereo, but those can each be broken out into two mono signals with an optional breakout cable, enabling up to 18 CV/audio signals to be easily connected to another synth, in just 4HP of front panel space.

Above is a quick video showing how the Link module can be used to allow a friend to stop by and you can hook your Eurorack synths together for a fun night of jamming! (There's also a sneak peek at the upcoming Evaton Technologies "Sonar" module in the video, too...)


A 5U version is also planned, which will allow easy connection between 5U and Eurorack systems, as well as within a large 5U system.

Link will be available Summer of 2018, and a pre-production prototype will be on display at Superbooth 2018.

http://www.evatontechnologies.com/link

Sonar, a module which generates CV and clocks based on ultrasonic rangefinding measurements, will be available later this year, and will also be on display as a prototype at Superbooth18. Sonar is still in development; look for an official announcement with full list of features soon."

SSL FX Capacitor 5U Module

via @AtomicShadow

"There was Collusion! Between @DougSlocum at Synthetic Sound Labs, Russ Hoffman at Evaton Technologies and Mrs. Shadow. The SSL FX Capacitor module arrived in 1 day and ambushed me under the Christmas tree. Thank you all so much!"

RF Nomad: Atomic Shadow Edition Available March 2016

"The wait is nearly over! The finalized aluminum RF Nomad Atomic Shadow Edition faceplates recently arrived from the sheetmetal vendor, and they look fantastic! Only a few more components remain to arrive before the first batch of 5U RF Nomad modules will begin to roll off the assembly line.

Each RF Nomad: Atomic Shadow Edition module will be hand-built and individually calibrated and tested by Evaton Technologies' founder, engineer, and chief bottle-washer: Russ Hoffman.

There is an email list signup sheet at www.evatontechnologies.com/5u-signup for folks interested in purchasing the RF Nomad Atomic Shadow Edition module when it becomes available.

Once modules are available to ship, I will send out another emailing to announce the finalized price and payment options.

The final module will include a length of coax cable with PL-259 connections on each end, and a hand crafted dipole antenna suitable for indoor installation. By using standard RF connectors, third-party outdoor antennas can also be used, for increased reception.

I'm looking forward to shipping a great product, and also to seeing what music all of you will create with it.

Acknowledgements

I'd like to thank Rod Mitchell (Atomic Shadow (www.atomicshadow.com)), Consulting Artist on this project, for all his input, inspiration, and encouragement. Rod's been twisting my arm to make some more modules in 'Man-Sized' 5U format, as he calls it. His efforts on that front may have succeeded; stay tuned!

Cheers,

Russ Hoffman
Evaton Technologies

www.evatontechnologies.com/5u-signup"

Evaton Technologies Synth DIY class @ West Liberty University

Russ Hoffman, of Evaton Technologies, recently gave a Synth DIY workshop at West Liberty University. Students learned how oscillators and filters work, while constructing a reduced version of the Evaton Technologies SDIY MDRONE kit. (The kits were reduced to a single oscillator, to accommodate the constraints of building the kits in the allotted time.)

The workshop was held in conjunction with Professor of Music, Dr. Matthew Harder's Electronic Music Ensemble, at West Liberty University.

The students will be performing with their new drone synths in an electronic music ensemble concert at the university in April.

You'll find photos here.

RF Nomad: Atomic Shadow Edition 5U Synth Module Status Update

Evaton Technologies RF Nomad: Atomic Shadow Edition Faceplate Teaser

Published on Dec 6, 2015 Russ Hoffman

http://www.evatontechnologies.com/

"The first major step in the progress on the production version of the RFN:ASE synth module is complete -- mechanical design of the faceplate and PCB carrier mechanical outline.

The PCB carrier will house a PCB from a Eurorack version of the RF Nomad, and provide power connector conversion to allow the Eurorack board to be plugged into 5U power.

I've posted up this quick video animation of the 3D CAD model as it stands today.

Consulting Artist, Atomic Shadow, (www.atomicshadow.com) helped to transform the popular RF Nomad Eurorack module into 5U format. Hundreds of Eurorack customers already enjoy the eerie sounds of the RF Nomad Shortwave Receiver module; soon 5U musicians will, too!

The RF Nomad: Atomic Shadow Edition (RFN:ASE) is going to be made in a short production run, the number of which is to be determined by interest expressed on the Evaton Technologies 5U signup form.

Also, please watch for Atomic Shadow's new album, "Shortwave Robot Pants," which features the prototype RF Nomad: Atomic Shadow Edition module."

Evaton Technologies Announces the "RF Nomad: Atomic Shadow Edition" 5U Synth Module

via Evaton Technologies:

"About a year ago, Atomic Shadow (Rod Mitchell) contacted me and asked if I'd be interested in doing a 5U version of the RF Nomad voltage-controlled shortwave receiver module. He then pointed me to his music, and I was blown away. The RF Nomad would be a perfect fit, and so a single one-off prototype of the RF Nomad was hand-made into a 5U format, and christened "RF Nomad: Atomic Shadow Edition."

That module now resides in the Command Center, and is part of Atomic Shadow's secret lair.

( RF Nomad: Atomic Shadow Edition, operated by its namesake, in the Command Center. )

The RF Nomad: Atomic Shadow Edition (RFN:ASE) is going to be made into a short production run, the number of which is to be determined by interest expressed on the Evaton Technologies 5U signup form. If you are interested in purchasing the RFN:ASE when it becomes available, or you know someone who might be interested, please have them sign up. http://www.evatontechnologies.com/5u-signup

Current Status
At present, several things are under development - An adapter board is being designed to allow a Eurorack version of the RF Nomad printed circuit board to be used in 5U format. This will be a high quality PCB with both Dot Com and MOTM power connectors available, and circuitry to correct the voltage levels as required by the Eurorack circuit. (This is how the original prototype was made, and has been in service at Atomic Shadow's Command Center for the past year.)

Also, a mechanical dimensioned drawing of the faceplate is underway, to be fabricated using the popular Metalphoto™ process. Artwork will be very similar to that shown in the attached photo of the prototype, and will include the "Atomic Shadow Edition" logo at the top of the panel!

The original prototype RFN:ASE used genuine vintage 1970's knobs. While I have located a possible source for those exact knobs, the lead times are horrible. I have found some similar knobs which are readily available and are also quite attractive.

Here is that similar knob, shown installed on a Synthesizers.com Q109, for scale:

A test bench is needed in order to perform final QA testing on the RFN:ASE, and so this little beauty was constructed this weekend. Note the empty slot, reserved for the RF Nomad: Atomic Shadow Edition!

Availability and Pricing
The RF Nomad: Atomic Shadow is expected to be available this winter. Pricing is yet TBD, but as a ballpark, probably around $250-275, depending on final costs.

In addition to the module, a length of antenna coax cable will be included, and a small, but high quality receiving antenna. The antenna connection will be made via a standard SO-239 socket on the front of the module, which means that the RFN:ASE will be compatible with commerically-available shortwave / ham radio receiving antennas and accessories.

http://www.evatontechnologies.com/5u-signup"

Update: RF Nomad Testing 1,2,3... by Atomic Shadow:


"This track was composed entirely from sounds generated by the RF Nomad module from Evaton Technologies. EQ, reverb and delay were added during mixing. The RF Nomad is a voltage controlled shortwave radio module. The tuning frequency can be swept with an LFO or other voltage sources to produce unique textures. Many thanks to Russ Hoffman for agreeing to produce this (so far), one of a kind, MU sized version."
previously posted here.

Evaton Technologies SDIY MDRONE

Published on Oct 25, 2015 Russ Hoffman

http://www.evatontechnologies.com/

"The Evaton Technologies SDIY MDRONE will be available in November. This video demonstration shows the powerful standalone drone synth that YOU build! Just in time for the holiday season, the SDIY MDRONE makes the perfect gift for the DIY'er in your family, or buy one for yourself! PCB + Parts kit available in November, with a pre-drilled, case with legend available soon after. (Video shows a clear pencil box case as an example of a case you could build yourself).

The SDIY MDRONE consists of 3 square wave oscillators and a bandpass filter with adjustable center frequency and bandwidth. The filter can be overdriven for a grittier sound. Simple thru-hole construction can be completed in as little as a single evening.

Operation from a single 9V battery allows hours of tweaking. Use the SDIY MDRONE alone, or with external effects for maximum fun. And, best of all, you can take pride in having built it yourself!

Detailed assembly manual has step-by-step instructions, and, for educational customer, also includes a discussion of the basic circuit theory."

EurekaSound Interviews Evaton Technologies' Russ Hoffman

Published on Jun 1, 2015 Russ Hoffman

"Dave from EurekaSound interviews Evaton Technologies' engineer, Russ Hoffman about the Evaton Technologies products sold thru EurekaSound.

The interview covers the MKAdapter, RF Nomad, and upcoming CLX module.

EurekaSound is the exclusive distributor of the MKAdapter microphone adapter for the MicroKorg vocoder synth, and also carries other Evaton Technologies products, as well as EurekaSound's own music products. "

http://www.evatontechnologies.com/

New Evaton Technologies CLX Proto Teaser Demo

Published on May 8, 2015 Russ Hoffman

"Evaton Technologes CLX dual clock/LFO/clocked-logic module prototype demo."

Some additional info in directly from Evaton Technologies:

"Evaton Technologies is pleased to announce a new module!

The CLX Dual Clock / LFO / Clocked Logic module will be available this summer.

6HP, 10 mA, with two independent free-running clocks that go from sub-1Hz to audio rate, with High and Low range select switches. Also available are the logical AND and Exclusive OR (XOR) of the two clocks, which provide the opportunity to experiment with interesting polyrhythms.

CLX is also useful as a square-wave or complex LFO, or drone audio source with ringmod courtesy of the AND and XOR outputs.

Available Summer 2015, MSRP $TBD. Watch this space for more info!

http://www.evatontechnologies.com/clx

Update: image added.

Oscillate:Pittsburgh Performances - Dr. Matthew Harder 03/21/15

Published on Mar 23, 2015 Russ Hoffman of Evaton Technologies

"Dr. Matthew Harder performs on Theremin, Monotrons, CS-01, and Ableton Live at Oscillate: Pittsburgh on 3-21-2015"

See the Oscillate: Pittsburgh channel at the bottom of this post for more.

Oscillate:Pittsburgh Performances - Zon Vern Pyles and Levi Graft

Published on Mar 22, 2015 Russ Hoffman

"Zon Vern Pyles and his student, Levi Graft, perform on Nord gear and Dot Com modular synth at Oscillate:Pittsburgh. 3/21/2015"

Oscillate:Pittsburgh Performances -- Russ and Nick

Published on Mar 22, 2015 Russ Hoffman

"Nick Breinich and Russ Hoffman [Evaton Technologies] perform a drone / improvisatory ambient electronic music set on Eurorack modular synthesizer and Haken Continuum Fingerboard at Oscillate: Pittsburgh, March 21 2015."

RF Nomad Testing 1,2,3...

"This track was composed entirely from sounds generated by the RF Nomad module from Evaton Technologies. EQ, reverb and delay were added during mixing. The RF Nomad is a voltage controlled shortwave radio module. The tuning frequency can be swept with an LFO or other voltage sources to produce unique textures. Many thanks to Russ Hoffman for agreeing to produce this (so far), one of a kind, MU sized version."

RF Nomad Launch Party Performances: 8CYLINDER & Tongue-Cut Sparrow

Published on Sep 30, 2014 Russ Hoffman

"8CYLINDER and Tongue-Cut Sparrow perform at the RF Nomad Launch Party, Saturday, Aug 23, 2014, at Assemble in Pittsburgh. The performance consists of modular synths, circuit-bent electronics, and, of course, an RF Nomad.

http://rhinoplex.org/8cylinder/

http://www.evatontechnologies.com/rf-...

Video credit: Videographer Ed Huang, dirque@412video.com"

Lots of synth spotting: Check out their Arturia Minibrute sound module conversion at 12:18. DSI Evolver, Korg ER-1, loads of homebrew and circuit-bent sound tools, and of course... Modulars!

All performances here.

RF Nomad Launch Party Performances: Margaret Cox

Published on Sep 29, 2014 Russ Hoffman

"Margaret Cox performs at the RF Nomad Launch Party, Saturday, Aug 23, 2014. Manipulated field recordings, amplified found objects, magnetic strip cards.
Video credit: Videographer Ed Huang, dirque@412video.com"

http://www.evatontechnologies.com/

All performances here.

RF Nomad Launch Party Performances

RF Nomad Launch Party Performances: Greg VanEck

Published on Sep 25, 2014 Russ Hoffman

"Greg VanEck performs on his modular synth, using an RF Nomad as a sound source for this patch.

About the performance, Greg notes: 'One way I discovered to interact with the Nomad is to squeeze the antennae. It can be very touchy when doing this, but I've found the slightest changes in pressure can sometimes really boost reception of a certain frequency, or interfere with it and totally cancel it out. I kept the antennae wrapped up in a coil and would slowly apply pressure and release to the rhythm of the patch... reminded me of interacting with my old noisy theremin.'

This technique can be clearly seen at 5:17.

Video from August 23, 2014 at the Evaton Technologies RF Nomad Launch Party, at Assemble PGH in Pittsburgh, PA, USA."

http://www.evatontechnologies.com/

RF Nomad Launch Party Performances: Margaret Cox

Published on Sep 29, 2014 Russ Hoffman

"Margaret Cox performs at the RF Nomad Launch Party, Saturday, Aug 23, 2014. Manipulated field recordings, amplified found objects, magnetic strip cards.
Video credit: Videographer Ed Huang, dirque@412video.com"

RF Nomad Launch Party Performances: 8CYLINDER & Tongue-Cut Sparrow

Published on Sep 30, 2014 Russ Hoffman

"8CYLINDER and Tongue-Cut Sparrow perform at the RF Nomad Launch Party, Saturday, Aug 23, 2014, at Assemble in Pittsburgh. The performance consists of modular synths, circuit-bent electronics, and, of course, an RF Nomad.

http://rhinoplex.org/8cylinder/

http://www.evatontechnologies.com/rf-...

Video credit: Videographer Ed Huang, dirque@412video.com"